Can I Use My Pc as a Cctv Dvr

How to connect an IP camera to your PC or to the reckoner monitor? If y'all've got your security video IP cameras domicile, and you don't plan for an NVR, you lot may get bug on how to straight connect an IP camera to PC (without routers, without internet, without DVR or without its receiver). This doesn't mean you are an idiot, but y'all are but not a technical guy or you just don't have experience in this kind of stuff.

It's wise to hook up your security IP cameras to a estimator (or computer monitor) for 24/7 monitoring and recording. You tin, with or without the Internet, connect your indoor or outdoor surveillance cameras to PC or to Mac with the top five solutions.

Pleased exist noted: Install your security cameras in the right positions firstly. You can refer to How to Install Domicile Security Cameras Successfully.
5 Solutions to Connect Your Security IP CCTV Camera to PC/Mac:

• Method ane. Connect a WiFi or PoE Photographic camera Directly to PC/Mac (without Internet)
• Method ii. Connect a WiFi Camera to Estimator via Router (with Cyberspace)
• Method iii. Connect a PoE (Wired) Camera to Computer without PoE Injector/Switch
• Method 4. Connect a PoE (Wired) IP Camera to Computer with PoE Injector/Switch
• Method v. Connect a CCTV Photographic camera Organisation to PC/Mac (with or without Network)

And I've covered third party software to connect your IP Camera to a computer in the final part.

Those methods will guide y'all to connect a wireless or PoE IP camera to PC (on Windows x, Windows eight.1, Windows 8, Windows seven, Windows XP and Windows Vista), and to a Mac (on Mac Os X 10.xiii, x.12, 10.11, 10.10, 10.9, etc.).

Important Note: The methods recommended below may NOT employ for the battery-powered security cameras, which crave initial setup on your phones.

WAIT! Bank check out these Special Deals before yous leave:

Correct now, you can go EXCLUSIVE & Large discounts on a wide range of Reolink security cameras & systems, wire-free & plugged-in, indoors & outdoors.

Here is a simple infographic illustrating the basic steps to connect a security photographic camera (organisation) to your PC/Mac. You may proceed reading for more important notes to help yous smoothly set all the things upward.

Method 1. Connect a WiFi or PoE Camera Directly to PC/Mac (without Internet)

The steps below detail how to connect your security IP photographic camera direct to PC/Mac, without an NVR or DVR, without a router network, without WiFi, and without any fees or complicated configuration.

Alternatively, you lot can endeavor the tiptop ii solutions for cameras without WiFi I have mentioned.

Requirements:

• Your WiFi or PoE camera
• The camera's power adapter
• Your computer (desktop or laptop)
• A network cable

And that's all.

Here is how:

Pace 1. Go your security camera charged.

Use the power adapter to get the camera plugged-in and charged. Normally, when you buy a WiFi IP camera, it comes with a power adapter. For a PoE camera, ask the supplier and purchase one that's workable for the camera.

Step 2. Use the network cablevision to connect to the camera and the figurer.

Normally there would be a 2-in-ane or 3-in-i cable attached from the camera. Notice the network connector from that cable and use the network cablevision to connect to information technology. Then connect the other stop of the network cable to the estimator.

If your figurer has a network already, disable it – make sure your computer is offline.

Stride 3. Scan and notice out the security camera'due south IP address on the calculator.

Now the security camera is connecting to your figurer basically and physically. But you still tin can't view the photographic camera on the calculator.

What you demand to practice now is to scan and observe out the camera's IP address. There should be surveillance software from the same supplier with the camera.

Take our test as an example. We have Reolink Client on the figurer. Launch information technology and it will automatically scan all the cameras in the same local LAN and testify the default IP address (every camera has a default and unique IP address when it leaves the factory). Like shooting fish in a barrel peasy!

Footstep four. Modify the computer'south IP address to the same network prefix of the IP camera.

And so in Pace three, you get your security photographic camera's default IP accost. In our examination, the default IP address of the photographic camera we use is 192.168.177.100, and now you need to change your estimator's IP accost to 192.168.177.x, where x identifies the node/host and is the number betwixt 2 and 254. So let's say the calculator's IP address is 192.168.177.12.

IP address 101: An IP address consists of two parts – one belongs to the network address and one belongs to the node address. All nodes on a given network share the aforementioned network prefix only have a unique host number.

Now to alter the computer's IP address (nosotros take Windows 10 as an example):

1) Press the Windows + R keyboard shortcut to bring out the Run box.

2) Enter "ncpa.cpl" and open up the "Network Connections" window.

3) Right-click your computer' network adapter and select "Properties".

iv) Select your computer's Cyberspace Protocol Version and click "Properties".

5) Select "Use the post-obit IP accost" and change the IP address into 192.168.177.12.

And done. Now your IP camera is connecting directly and communicating with your PC, because they are at present in the aforementioned piddling LAN. You can watch your IP photographic camera with Reolink Client on your reckoner.

Here's the video footage shared by one of our customers (captured past Reolink RLC-410).

Important: Since at that place is no router network, the IP camera would not transmit information or send alarms to your telephone. Still, you lot tin can record and save all the footage onto your computer.

If you're gonna use your IP camera with the estimator all the fourth dimension like this (without router network), you lot'd better alter the default status of your IP camera's IP address to the static to keep it the same all the time, because each time you reboot the IP camera, its IP accost will be changed and you volition need to do all the steps above again. To keep the IP camera's IP accost the same all the time, caput to "Device Settings" and "Network General" on the Client (Reolink Customer in our examination), and cull "Static" for "Network Admission". And done.

Method ii. Connect a Wireless/WiFi Camera to Computer via Router (with Internet)

If you practice have WiFi network and need to remotely see the IP camera when you're not at that place, you can connect your wireless or WiFi camera to estimator wirelessly via your router.

Requirements:

• Your WiFi camera
• The camera's power adapter
• Your calculator (desktop or laptop)
• A network cable
• A router

Here is how:

Stride i. Become your WiFi security photographic camera charged.

Use the power adapter to become the camera plugged-in and charged.

Step two. Use the network cable to connect to the photographic camera and the router.

A WiF photographic camera needs to connect to the router with a network cable for initial setup, because the new camera itself wouldn't recognize and auto-pick up a network that it never uses. Only later the right WiFi settings can you disconnect the cablevision from the camera and the router.

And yeah again, normally there would be a 2-in-1 or 3-in-i cable fastened from the WiFi camera. Discover the network connector from that cable and employ the network cable to connect to it. Then connect the other stop of the network cablevision to the router.

Step 3. Lookout the IP camera on PC/Mac

On the computer, launch the surveillance software to add the camera and watch live view directly.

In our examination, we open Reolink Client. Since the figurer and the camera are in the same network (using the same router network), Reolink Customer automatically searches and displays the camera directly. Click "Outset" and you tin can view the camera on PC. And you can prepare the configurations for all the functions y'all desire the camera to have.

Here's the video footage shared by one of our customers.

Reolink E1 Pro

Wireless Pan-Tilt Smart Home Photographic camera

Smart, Powerful and Affordable All-Round Home Protection. 355° Pan and 50° Tilt; 4MP Super Hard disk, Ii-Fashion Audio, 2.4/five GHz WiFi, with Google Assistant Integration.

Stride 4. Fix WiFi settings and remove the network cable.

Do remember to brand the WiFi settings for the camera. On the software, navigate to "Device Settings" and "Network". Choose the WiFi network and enter the password, and washed. Cameras from the different brands would have different WiFi settings. Please refer to the guides yous go from your supplier.

After that, remove the network cable, and so the security IP CCTV camera connects to the figurer wirelessly.

Important: If yous demand to meet the IP camera from another computer that is not in the aforementioned network, you need to input the camera's UID into the software to remotely access the camera.

Method 3. Connect a PoE (Wired) IP Camera to Reckoner without PoE Injector/Switch

Connecting a PoE wired IP camera to a computer via the router is similar to that of a WiFi camera, and even much easier – you don't need to use a ability adapter, gear up the WiFi and remove the network cable.

Requirements:

• Your PoE camera
• Your computer (desktop or laptop)
• A network cable
• A router with PoE feature

Here is how:

Pace 1. Use the network cable to connect to the camera and the router.

PoE (Ability over Ethernet) means you can just utilize a single network cable for both video and ability transmission. Then just connect the camera to the router via the network cable, and the camera will get ability supply and network access.

Please make sure your router has the PoE feature. If not, try the adjacent method.

Step 2. Watch the IP camera on the calculator.

On the computer, launch the surveillance software to add the camera and watch live view directly.

In our test, we open up Reolink Customer. Since the computer and the camera are in the same network, Reolink Client automatically searches and displays the camera directly. Click "Get-go" and you can view the camera on PC. And yous tin set up the configurations for all the functions you lot want the camera to have.

Here'southward the video footage shared by one of our customers.

Reolink RLC-410

PoE Bullet IP Security Photographic camera with Audio

5MP/4MP Super Hard disk drive; Outdoor/Indoor Protection; 100ft Infrared Night Vision; Audio Recording; Mobile Remote Access & Control.

Important: If you need to run into the IP camera from another figurer that is not in the same network, y'all demand to input the camera'south UID into the software to remotely access the camera.

Method 4. Connect a PoE (Wired) IP Camera to Calculator with PoE Injector/Switch

If your router does not support PoE, you lot need a PoE injector or PoE switch to assist connect your IP camera to PC.

Requirements:

• Your PoE camera
• The camera'south power adapter
• Your computer (desktop or laptop)
• A network cable
• A router
• A PoE injector or PoE switch

Here is how:

Since the steps on how to connect a PoE IP camera to PC via PoE Injector/switch are quite the same to that of connecting without a PoE Injector/switch, we'd like to brand information technology more simpler to understand hither.

Connect all the devices equally the movie showed below:

Important: In one case y'all connect the PoE IP camera to the PoE injector or switch which is connected to a router via Ethernet cables, you lot've successfully connected the camera to the network. For a wireless IP photographic camera, you need to use a network cablevision to connect information technology to the router if yous haven't set up the WiFi network configuration. And then the wireless IP camera is in the network. You lot can ready up the WiFi configuration later to make the wireless IP camera connect wirelessly.

Brand sure your wireless IP camera is continued to a power supply.

Then on Reolink Client, add the photographic camera and watch live view direct.

If you need to see the IP camera from some other reckoner that is not in the aforementioned network, you need to input the camera'due south UID into the software to remotely access the camera.

Method five. Connect a CCTV Camera Organisation to PC/Mac (with or without Network)

Reolink security camera systems, like the PoE kit RLK8-410B4, accept their own proprietary networks, and can piece of work with and without your router network.

Here's how:

How to connect a CCTV security camera system to a estimator without router network

Step 1. Connect all the cameras to the NVR.

When y'all receive the new IP camera system you bought, connect all the devices you got – connect the NVR to your computer's monitor and the mouse, utilise the power adapters to charge the NVR and cameras, etc. For a WiFi organization, once the WiFi NVR and the WiFi cameras are charged, they connected to each other automatically and would start to communicate. For a PoE system, connect the PoE cameras to the NVR via the network cables provided.

Step 2. Start watching the IP cameras.

The startup and setup wizard will pop up to guide you lot to sentry your cameras and do other configurations.

Now you lot can run into all the IP cameras on your monitor and start recording.

How to connect a CCTV security photographic camera organization to a computer with router network

Step ane. Do the step ane shown above once again.

Step two. Connect the NVR to your router via the network cable provided.

Footstep 3. Start watching the IP cameras.

The startup and setup sorcerer will pop up to guide you to lookout your cameras and exercise other configurations.

If you demand to encounter the IP cameras from another computer that is not in the same network, yous need to input the NVR'southward UID into the software to remotely access the cameras.

Third-Party Software to Connect IP Camera to PC/Mac

Y'all can also opt for 3rd-party software to connect and set up up a security camera on the reckoner. Make sure the software can handle all the cameras on the network and support all the features for the cameras. Ordinarily, the third-party software has several versions. And if you want to apply full features of the camera, you need to pay for a premium version.

If your security IP camera is not working properly equally expected or if you lot get any issues, you tin try the top 10 solutions to fix IP cameras not working.

For any questions, please don't hesitate to leave it in your comment. I volition respond equally before long as possible.

davisfanceth.blogspot.com

Source: https://m.reolink.com/connect-security-ip-camera-to-pc/

Share this post